6. Troubleshooting
If the humidifier can not work, please check the following instructions carefully before
requesting maintenance.
Malfunctions Reasons
analysis
Troubleshooting
Indicator is OFF, no
mist
1.Power plug is not inserted well
2.Power switch is not turned on
1.Insert the power plug well
2.Rotate the knob clockwise
for connect the power
The red indicator on,
no mist
No water in water tank or little
water left
Fill the water into water tank
New unit
Open the water tank cover,
place the water tank to a
shady and cool place for 12
hours
Odor emitted from
the humidifier
Dirty Water or the water exists
too long
Wash the water tank and
water groove and change
water
There is little water left
Fill water into water tank
Abnormal noise
Due to the jolt when unit is placed
on the table
Please place the unit on a
firm table or on the floor
There's accumulated
water around the
humidifier
Ambient humidity is high; mist
cannot be diffused and cannot be
absorbed by air sufficiently. The
water will be accumulated around
the humidifier.
Decrease the humidifying
capacity properly (especially
operate the humidifier at
night). If use air conditioner
or fan to accelerate indoor
air flowage, humidifying
effect will be better.
7. Specification
Note: The following specification are subject to change without notices, please
refer to the nameplate for reference
Model
Rated power supply
Rated power
Cubage of
water tank
Volume of
humidifying
FHUM2012
100-240V~
50/60Hz
25W 4.0L 300ml/h
Accessories
cleaning brush x 1, user manual x 2
-8-
-9-
