manualshive.com logo in svg

Fortress Technologies ES210, User Manual

Share
Download
Fortress Technologies ES210 User Manual Download Page 211

Bridge GUI Guide: Maintenance

196

how quickly each completes, you may not see every 
operation.
When upgrade operations are 

Finished

, the dialog 

Note

 

instructs you to restart the controller device to activate the 
newly upgraded software image. 

4

Click to 

CLOSE

 the 

Upgrade Status

 dialog.

The 

Version

 frame on the 

System

 screen shows the non-

running image number as the 

Image for Next Boot

.

5

In the 

System

 screen’s 

Restart Controller Device

 frame, click 

EXECUTE

.

The status line at the top of the screen advises: 

Restarting 

the controller device - please be patient.

 You will have to log 

back on after the Bridge reboots.

After the upgrade, the Bridge defaults to the boot partition with 
the latest software image—the last image booted—whenever it 
restarts.

If you experience problems after rebooting, revert to the 
previous Bridge software version (below) and then retry the 
upgrade.

NOTE:

 Configura-

tion changes are

written 

only

 to the run-

ning boot partition. If
you boot from the non-
running boot partition,
settings will revert to
those in effect at the
time the Bridge’s soft-
ware was last upgraded.

To revert to the previous software version:

Because it is not overwritten, the software version the Bridge 
was running before the upgrade remains available in the event 
of a problem with the newer version of the software.

1

Log on to the Bridge GUI through an 

Administrator

-level 

account and select 

Maintain

 

->

 

System

 from the menu on 

the left.

2

In the 

System

 screen’s 

Version

 frame, in 

Image for Next 

Boot

, select the non-running image of the software version 

in effect before you upgraded from the dropdown.

3

Click 

EXECUTE

. 

4

In the same screen’s 

Restart Controller Device

 frame, click 

EXECUTE

.

The status line at the top of the screen advises: 

Restarting 

the controller device - please be patient.

 You will have to log 

back on after the Bridge reboots.

6.1.6

Backing Up and Restoring

The backup/restore function of the Bridge creates and 
downloads a configuration file that can be used to restore the 
settings it saves. You can create multiple backup files under 
pathnames of your choosing.

Summary of Contents for ES210



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands