Fortress Technologies ecure Wireless Access Bridge User Manual Download Page 17

Page: 17 / 144

Fortress Wireless Access Bridge: Installation

2.1.2

Compatibility

The Fortress Bridge is fully compatible with Fortress Secure
Client versions 2.4 and higher.

2.2 Preparation

2.2.1

Shipped and Optional Parts

Included in each Fortress Bridge shipment are:

Fortress Secure Wireless Access Bridge, comprising:

one eight-port Ethernet LAN switch

one PoE Ethernet WAN port

two USB ports

one 802.11 a/b/g multi-mode radio

one 802.11a radio

two lightning arrestor modules

one universal AC-to-48V DC power adapter

AC power cord

one EBU-101-01 PoE adapter

one RJ-45-to-DB9 adapter
(for use with a standard, straight-through CAT5 assembly)

ES520 Weatherizing Kit, including:

one front-panel cover plate

one RJ-45 connector boot assembly (six pieces)

one antenna port cap

ES520 Mast-Mounting Kit, including:

one mast mounting bracket

two 4" long, fully threaded 1/4-20 hex bolts

two 1/4" split lock washers

Optionally, you can purchase from Fortress Technologies:

GHz 9dBi omnidirectional antenna with an N-type male

direct connector

2.4–2.485 GHz 9dBi omnidirectional antenna with an
integrated 2' antenna cable terminating in an N-type male
connector

802.11a/b/g 2/2dBi tri-band rubber duck antenna with an
RP-TNC connector and RP-TNC-to-N-type male connector
adapter

The availability and specifications of antennas offered for
purchase from Fortress Technologies are subject to change.
Contact your Fortress representative for details and pricing.

1. In outdoor installations, it is mandatory that the Bridge be powered with the

EBU-101-01 PoE adapter (or equivalent).

Summary of Contents for ecure Wireless Access Bridge

















































































































































Search results

Summary of Contents for ecure Wireless Access Bridge

Reviews:

Related manuals for ecure Wireless Access Bridge

Brands by name

Popular brands

Fortress Technologies ecure Wireless Access Bridge, User Manual

Search results

Summary of Contents for ecure Wireless Access Bridge

Reviews:

Related manuals for ecure Wireless Access Bridge

Brands by name

Popular brands