Fortress Bridge: Command-Line Interface
90
[VAP]>
set vap {1|2|3|4} [-ssid
<ssidstring>
|.] [-dtim 1-255] [-hidessid on|off]
[-rts 1–2345|off] [-frag 256–2345|off] [-only11g on|off]
[-suite fortress|clear|open-wep|shared-wep|8021x|wpa|wpa-psk|wpa2|wpa2-psk|wpa-mixed|wpa-mixed-psk]
[-wepkeytype hex|passphrase] [-wepkeysize 40|104] [-wepkey1
<key>
] [-wepkey2
<key>
]
[-wepkey3
<key>
] [-wepkey4
<key>
] [-weptxkey 1–4] [-keytype hex|passphrase] [-rekeyperiod
<sec>
]
[-passphrase
<phrase>
] [-hex
<key>
]
In the dot (
.
) input for the
-ssid
switch clears the SSID string.
The output of
set vap help
provides guidance for many of the
Security Suite parameters shown above (described in detail in
Section 3.3.4).
Security Suite options
fortress
and
clear
require no further
parameters to be set. When you have configured a different
Security Suite setting, you can view the parameters configured
for it with the
show
command.
[VAP]>
show vap 2
[RADIO 1]
[VAP 2]
SSID: 0987abc
DTIM: 1
Hide SSID: on
RTS Threshold: off
Frag Threshold: off
Only 11g: off
Security Suite: wpa
Rekey period: 300
You can clear the settings for VAPs 2 through 4, effectively
deleting them from the radio configuration.
[VAP]>
clear vap 2
Committing changes...
Reboot is required. [Y|N]?
Radio 1 and Radio 2 each require a VAP 1 to be configured at
all times. So, while you can edit VAP 1 on either radio, with the
set
command, you cannot
clear
it. Attempting to do so will
result in an error message that offers you the alternative of
resetting VAP 1 to its default configuration.
The
VAP
submenu can be accessed only from AP mode (refer
to Section 6.1.1 for more detail), and you can return to AP
mode with the
AP
command.
In VAP mode the standard
quit
and
reboot
commands
remain available. Changes to Bridge radio virtual interfaces
always require you to reboot, as shown in the example output
throughout this section.
6.4.4
Bridge Passwords in the CLI
Two passwords apply to the Bridge GUI, one for the
admin
(administrator) account, and one for the
operator
(view-only)
account. The Bridge CLI has only an administrator account.
Summary of Contents for ecure Wireless Access Bridge
Page 2: ......
Page 18: ......
Page 47: ...Fortress Bridge Configuration 37 NOTE For security ...
Page 87: ......