System Status
Status page
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
71
Figure 30: Alert Message Console
The following types of messages can appear in the Alert Message Console:
If there is insufficient space for all of the messages within the Alert Message Console
widget, select History to view the list of alerts in a new window.
To clear alert messages, select the History icon and then select Clear Alert Messages,
which is located at the top of the pop-up window. This will acknowledge and hide all
current alert messages from your FortiGate unit.
Select Edit to display Custom Alert Display options that offer the following customizations
for your alert message display:
•
Do not display system shutdown and restart.
•
Do not display firmware upgrade and downgrade.
•
Do not display conserve mode messages
Statistics
The Statistics widget is designed to allow you to see at a glance what is happening on
your FortiGate unit with regards to network traffic and attack attempts.
You can quickly see the amount and type of traffic as well as any attack attempts on your
system. To investigate an area that draws your attention, select Details for a detailed list of
the most recent activity.
The information displayed in the statistics widget is derived from log messages that can be
saved to a FortiAnalyzer unit, saved locally, or backed up to an external source such as a
syslog server. You can use this data to see trends in network activity or attacks over time.
Various configuration settings are required to actually collect data for the statistics widget.
See the descriptions of content archive and attack log for details.
For detailed procedures involving the Statistics list, see
“Viewing Statistics” on page 83
System restart
The system restarted. The restart could be due to
operator action or power off/on cycling.
Firmware upgraded by
<admin_name>
The named administrator upgraded the firmware to a
more recent version on either the active or non-active
partition.
Firmware downgraded by
<admin_name>
The named administrator downgraded the firmware to
an older version on either the active or non-active
partition.
FortiGate has reached connection
limit for <n> seconds
The antivirus engine was low on memory for the
duration of time shown. Depending on model and
configuration, content can be blocked or can pass
unscanned under these conditions.
Found a new FortiAnalyzer
Lost the connection to FortiAnalyzer
Shows that the FortiGate unit has either found or lost
the connection to a FortiAnalyzer unit. See
to a FortiAnalyzer unit” on page 650
.
New firmware is available from
FortiGuard
An updated firmware image is available to be
downloaded to this FortiGate unit.
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...