Customizing the display of log messages
Log&Report
FortiGate Version 4.0 Administration Guide
666
01-400-89802-20090424
Filtering is also another way to customize the display of log messages. By using the filter
icon, you can display specific information of log messages. For example, you may want to
display only event log messages that have a severity level of alert.
Column settings
By using Column Settings, you can customize the view of log messages in Formatted
view. By adding columns, changing their order, or removing them, you can view only the
log information you want.
The Column Settings feature is available only in Formatted view.
Figure 436: Column settings for viewing log messages
To customize the columns
1
Go to
Log&Report > Log Access
.
2
Select the tab to view logs from,
Memory
,
Disk
or
Remote
.
3
Select a log type from the
Log Type
list.
4
Select the
View
icon if you are viewing a log file on a FortiAnalyzer unit.
5
Select the
Column Settings
icon.
6
Select a column name in the
Available fields
list and then select one of the following to
change the views of the log information:
7
Select
OK
.
Note:
For more information about filtering log messages, see
.
-
>
Select the right arrow to move selected fields from the
Available fields
list to
the
Show these fields in this order
list.
<-
Select the left arrow to move selected fields from the
Show these fields in this
order
list to the “Available fields” list.
Move up
Move the selected field up one position in the
Show these fields in this order
list.
Move down
Move the selected field down one position in the
Show these fields in this
order
list.
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...
