Web-based manager
Web-based manager pages
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
59
•
Figure 19: Example of interface list column settings
Figure 20: A FortiGate-5001SX interface list with column settings changed
Using filters with column settings
On firewall policy, IPv6 policy, predefined signature, firewall user monitor, IPSec monitor
and log and report log access lists you can combine filters with column settings to provide
even more control of the information displayed by the list.
For example, you can go to
Intrusion Protection > Signature > Predefined
and configure
the Intrusion Protection predefined signatures list to show only the names of signatures
that protect against vulnerabilities for a selected application. To do this, set
Column
Settings
to only display
Applications
and
Name
. Then apply a filter to
Applications
so that
only selected applications are listed. In the pre-defined signatures list you can also sort
the list by different columns; you might want to sort the list by application so that all
signatures for each application are grouped together.
Right Arrow
Left Arrow
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...
