Default web portal configurations
SSL VPN
FortiGate Version 4.0 Administration Guide
558
01-400-89802-20090424
Adding and editing widgets
To add or edit SSL VPN web portal widgets, go to
VPN
>
SSL
>
Portal
and select
Create
New,
then select
OK
. The SSL VPN web portal is displayed. You can also edit an existing
SSL VPN web portal. You can add, remove, and edit the widgets that appear on the web
portal.
Figure 366: SSL VPN web portal - full-access Default configuration window
Latest Patch Level
- If you set
Action
to
Check Latest Version
, enter
the latest acceptable patch number.
Tolerance -
If you set
Action
to
Check Latest Version
, set
Tolerance
to 0 if clients must have the latest patch. Set
Tolerance
to a number to
control how close clients must be to the latest patch. For example, if
the latest patch level is 4 and tolerance is 2, clients will be accepted
with patch 2, 3, 4, 5, or 6.
OK
Select to save the configuration. If you select
OK
, you exit out of the
SSL VPN web portal configuration window.
Cancel
Select to exit the configuration window without saving any changes.
Apply
Select to apply any changes made in the web portal configuration. If
you select
Apply
, you will not leave the portal configuration window.
Settings
Select to edit the
General
or
Advanced
settings for the SSL VPN web
portal. See
“SSL VPN web portal” on page 554
.
Help
Indicates the location of the SSL VPN web portal online help icon. You
cannot change or move this icon. Active when SSL VPN web portal is
activated by user.
Log out
Indicates the location of the SSL VPN web portal log out icon. You
cannot change or move this icon. Active when SSL VPN web portal is
activated by user.
Add Widget list
Select to add a widget to the SSL VPN web portal configuration.
Help icon
Log out icon
Add Widget list
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...