Adding or configuring an application control list entry
Application Control
FortiGate Version 4.0 Administration Guide
526
01-400-89802-20090424
Adding or configuring an application control list entry
To add a new application control list entry or edit an existing one, go to
UTM > Application
Control > Control list
, and select the
Edit
icon for the list you want to modify. To add a new
entry, select
Create New
. To edit an existing entry, select the
Edit
icon if the entry you want
to modify.
Figure 348: The application control list entry for FTP.
ID
A unique number used primarily when re-ordering application entries.
Category
The category indicates the scope of the applications included in the
application entry if
Application
is set to
all
. For example, if
Application
is
all
and
Category
is
toolbar
, then all the toolbar applications are
included in the application entry even though they are not specified
individually.
If
Application
is a single application, the value in
Category
has no
effect on the operation of the application entry.
Application
The FortiGate unit will examine network traffic for the listed
application. If
Application
is
all
, every application in the selected
category is included.
Action
If the FortiGate unit detects traffic from the specified application, the
selected action will be taken.
Logging
If traffic from the specified application is detected, the FortiGate unit
will log the occurrence and the action taken.
Delete icon
Select to delete the application entry.
Edit icon
Select to edit the application entry.
Insert Application Before
icon
Select to create a new application entry above the entry in which you
selected the icon.
Move To icon
Select to move the application entry to a different position in the list.
Category
The applications are categorized by type. If you want to choose an IM
application, for example, select the
im
category, and the application
list will show only the
im
applications.
The
Category
selection can also be used to specify an entire category
of applications. To select all IM applications for example, select the
im
category, and select
all
as the application. This specifies all the IM
applications with a single application control list entry.
Application
The FortiGate unit will examine network traffic for the listed
application. If
Application
is
all
, every application in the selected
category is included.
Action
If the FortiGate unit detects traffic from the specified application, the
selected action will be taken.
Options
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...