Viewing the application control lists
Application Control
FortiGate Version 4.0 Administration Guide
524
01-400-89802-20090424
Figure 344: ISIS.Over.IPv4 application page
Viewing the application control lists
Each application control list contains details about the application traffic to be monitored
and the actions to be taken when it is detected. To take effect, an application control list
must be selected in a protection profile.
No default lists are provided.
To view the application control lists, go to
UTM > Application Control
.
Figure 345: The application control lists
Creating a new application control list
To create a new application control list, go to
UTM > Application Control > Control List
and
select
Create New
. Enter a name and optionally, a comment of description. Select
OK
.
Since a new application control list is blank, the list edit window appears. For information
on creating application control list entries, see
“Configuring an application control list” on
Create New
Select
Create New
to add a new application control list.
Name
The available application control lists.
# of Entries
The number of application rules in each application control list.
Profiles
The protection profile each application control list has been applied to.
If the list has not been applied to a protection profile, this field will be
blank.
Comment
An optional description of each application control list.
Delete icon
Select to remove the application control list. The delete icon is only
available if the application control list is not selected in any protection
profiles.
Edit icon
Select to edit the application control list.
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...