Data Leak Prevention
DLP Sensors
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
513
Figure 338: List of rules in a DLP sensor
Adding or editing a rule in a DLP sensor
To add or edit a rule in a DLP sensor go to
UTM > Data Leak Prevention > Sensor
and
select the
Edit
icon of the sensor to be configured. To add a DLP rule to a sensor, select
Create New
. To edit a rule already included in the sensor, select the edit icon of the sensor
you want to edit.
Figure 339: Adding a DLP rule to a DLP sensor
Name
The DLP sensor name.
Comment
The optional description of the DLP sensor.
Create New
Select
Create New
to add a new rule or compound rule to the sensor.
Enable
You can disable a rule or compound rule by clearing this check box.
The item will be listed as part of the sensor, but it will not be used.
Rule name
The names of the rules and compound rules included in the sensor.
Action
The action configured for each rule. If the selected action is
None
, no
action will be listed.
Although archiving is enabled independent of the action, the
Archive
designation will appear with the selected action.
For example, if you select the
Block
action and enable
Archive
for a
rule, the action displayed in the sensor rule list is
Block, Archive
.
Comment
The optional description of the rule or compound rule.
Delete and Edit icons
Delete or edit a rule or compound rule.
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...