AntiVirus
File Quarantine
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
449
•
Configuring the AutoSubmit list
To add a file pattern to the AutoSubmit list, go to
UTM > AntiVirus > AutoSubmit
. Note that
the autosubmit feature is available only if your FortiGate unit has a local hard disk.
Figure 283: New File Pattern dialog box
Configuring quarantine options
Go to
UTM > AntiVirus > Config
to set quarantine configuration options, such as whether
to quarantine blocked or infected files and from which service.
You can configure quarantine options for HTTP, FTP, IMAP, POP3, SMTP, IM, and NNTP
Traffic. If your FortiGate unit supports SSL content scanning and inspection you can also
quarantine blocked and infected files from HTTPS, IMAPS, POP3S, and SMTPS traffic.
To enable HTTPS quarantine you must set
HTTPS Content Filtering Mode
to
Deep Scan
in the
Protocol Recognition
part of the protection profile. For more information, see
content scanning and inspection” on page 399
Figure 284: Quarantine Configuration (quarantine to FortiAnalyzer unit)
File Pattern
Enter the file pattern or file name to be upload automatically to Fortinet.
Enable
Select to enable the file pattern
Note:
To enable automatic uploading of the configured file patterns, go to
AntiVirus > File
Quarantine > Config
, select
Enable AutoSubmit
, and select
Use File Pattern
.
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...