Fortinet Gate 60D, Administration Manual

Page: 363 / 706

Firewall Schedule Configuring one-time schedules
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
363
http://docs.fortinet.com/ • Feedback
Configuring one-time schedules
To add a one-time schedule, go to Firewall > Schedule > One-time . Complete the fields as
described in the following table and select OK .
To put a policy into effect for an entire day, set schedule start and stop times to 00.
Figure 220: New One-time Schedule
Delete icon Remove the schedule from the list. The Delete icon appears only if the schedule
is not being used in a firewall policy.
Edit icon Edit the schedule.
Name Enter a name to identify the one-time schedule.
Start Select the start date and time for the schedule.
Stop Select the stop date and time for the schedule.
Tip: You can also create one-time schedules when you configure a firewall policy. Go to
Firewall > Policy , select the appropriate policy tab and then Create New . From the Schedule
list, select One-time > Create New .