Fortinet Gate 60D, Administration Manual

Page: 27 / 706

What’s new in FortiOS 4.0
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
27
http://docs.fortinet.com/ • Feedback
What’s new in FortiOS 4.0
This section lists and describes some of the new features and changes in FortiOS
Version 4.0.
• FortiOS 4.0 FortiGate models and features supported
• UTM features grouped under new UTM menu
• Data Leak Prevention
• Application Control
• SSL content scanning and inspection
• WAN Optimization
• Endpoint control
• Network Access Control (NAC) quarantine
• IPS extensions
• DoS policies for applying IPS sensors
• NAC quarantine in DoS Sensors
• Adding IPS sensors to a DoS policy from the CLI
• One-arm IDS (sniffer mode)
• IPS interface policies for IPv6
• IPS Packet Logging
• Enhanced Antispam Engine (ASE)
• WCCP v2 support
• “Any” interface for firewall policies
• Global view of firewall policies
• Identity-based firewall policies
• Web filtering HTTP upload enhancements
• Traffic shaping enhancements
• Firewall load balancing virtual IP changes
• Per-firewall policy session TTL
• Gratuitous ARP for virtual IPs
• Changes to protection profiles
• Changes to content archiving
• Customizable web-based manager pages
• Administration over modem
• Auto-bypass and recovery for AMC bridge module
• Rogue Wireless Access Point detection
• Configurable VDOM and global resource limits
• User authentication monitor
• OCSP and SCEP certificate over HTTPS