Fortinet Gate 60D, Administration Manual

Page: 183 / 706

System Config HA
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
183
http://docs.fortinet.com/ • Feedback
Figure 97: Example HA statistics (active-passive cluster)
Changing subordinate unit host name and device priority
To change the host name and device priority of a subordinate unit in an operating cluster,
go to
System > Config > HA to display the cluster members list. Select Edit for any slave
(subordinate) unit in the cluster members list.
Refresh every Select to control how often the web-based manager updates the HA
statistics display.
Back to HA monitor Select to close the HA statistics list and return to the cluster members list.
Unit The host name and serial number of the cluster unit.
Status Indicates the status of each cluster unit. A green check mark indicates that
the cluster unit is operating normally. A red X indicates that the cluster unit
cannot communicate with the primary unit.
Up Time The time in days, hours, minutes, and seconds since the cluster unit was last
started.
Monitor Displays system status information for each cluster unit.
CPU Usage The current CPU status of each cluster unit. The web-based manager
displays CPU usage for core processes only. CPU usage for management
processes (for example, for HTTPS connections to the web-based manager)
is excluded.
Memory Usage The current memory status of each cluster unit. The web-based manager
displays memory usage for core processes only. Memory usage for
management processes (for example, for HTTPS connections to the
web-based manager) is excluded.
Active Sessions The number of communications sessions being processed by the cluster
unit.
Total Packets The number of packets that have been processed by the cluster unit since it
last started up.
Virus Detected The number of viruses detected by the cluster unit.
Network Utilization The total network bandwidth being used by all of the cluster unit interfaces.
Total Bytes The number of bytes that have been processed by the cluster unit since it
last started up.
Intrusion Detected The number of intrusions or attacks detected by Intrusion Protection running
on the cluster unit.