System Network
Routing table (Transparent Mode)
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
149
To enable web caching for the explicit web proxy
You can enable web caching for the explicit web proxy on FortiGate units that support
WAN optimization and web caching. For more information, see
1
“To enable the explicit web proxy on one or more interfaces” on
to enable the explicit web proxy
2
Go to
WAN Opt. & Cache > Cache
and select
Enable Cache Explicit Proxy
.
3
Select Apply to save your changes.
Web content requested by users using the explicit proxy are now cached by the
FortiGate unit using the WAN optimization web cache.
Routing table (Transparent Mode)
In NAT/Route mode the static routing table is located at
System > Routing > Static
, but in
Transparent Mode that static routing table is located at
System > Network > Routing
Table
.
Adding a static route in Transparent Mode
1
Ensure your FortiGate unit is in Transparent mode. For more details see
.
2
Go to
System > Network > Routing Table
.
3
Select
Create New
.
Figure 73: Static routing table - Transparent Mode
Transparent mode route settings
Configuring a static route in Transparent mode
1
Go to
System > Network > Routing Table
.
2
Select
Create New
.
You can also select the
Edit
icon of an existing route to modify it.
3
Enter the
Destination IP
and netmask.
4
Enter the
Gateway
IP address.
Create New
Add a new static route.
#
Position of the route in the routing table.
IP
The destination IP address for the route.
Mask
The netmask for the route.
Gateway
The IP address of the next hop router to which the route directs traffic.
Distance
The administration distance or relative preferability of the route. An
administration distance of 1 is most preferred.
Delete icon
Remove a route.
View/edit icon
Edit or view a route.
Move To icon
Change the position of a route in the list.
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...