Fortinet Gate 60D Administration Manual Download Page 125 | Manualshive

Page: 125 / 706

background image

System Network

Interfaces

FortiGate Version 4.0 Administration Guide
01-400-89802-20090424

125

http://docs.fortinet.com/

Figure 58: Edit Interface settings

Name

Enter a name for the interface.
You cannot change the name of an existing interface.

Alias

Enter another name for the interface that will easily distinguish this interface from
another. This is available only for physical interfaces where where you cannot
configure the name. The alias can be a maximum of 15 characters.
The alias name is not part of the interface name, but it will appear in brackets
beside the interface name. It will not appears in logs.

Type

The type of the interfaces. When creating a new interface, this is VLAN by default.
On models 300A, 400A, 500A, 800 and higher, you can create VLAN, 802.3ad
Aggregate, and Redundant interfaces.
•

On FortiGate 100A and 200A models of Rev2.0 and higher and on all 60B
models, software switch is a valid type. You cannot edit this type in the GUI.

•

FortiWiFi models support up to four SSIDs by adding up to three wireless
interfaces (for a total of four wireless interfaces).

Other models support creation of VLAN interfaces only and have no

Type

field.

You cannot change the type of an existing interface.

Interface

Select the name of the physical interface on which to create the VLAN. Once
created, the VLAN subinterface is listed below its physical interface in the
Interface list.
You cannot change the interface of an existing VLAN subinterface.
This field is only displayed when Type is set to VLAN.

VLAN ID

Enter the VLAN ID that matches the VLAN ID of the packets to be received by this
VLAN subinterface. You cannot change the VLAN ID of an existing VLAN
subinterface.
The VLAN ID can be any number between 1 and 4094 and must match the VLAN
ID added by the IEEE 802.1Q-compliant router or switch connected to the VLAN
subinterface. For more information, see

“VLAN overview” on page 150

This field is only displayed when

Type

is set to VLAN.

Virtual Domain

Select the virtual domain to which this VLAN subinterface belongs.
Admin accounts with super-admin profile can change the VDOM for a VLAN when
VDOM configuration is enabled. For more information, see

“Using virtual

domains” on page 103

.

«
...
123
124
125
126
127
...
»

Summary of Contents for Gate 60D



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Gate 60D

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands