Fortinet Gate 60D, Administration Manual

Page: 107 / 706

Using virtual domains Virtual domains
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
107
http://docs.fortinet.com/ • Feedback
Global configuration settings
The following configuration settings affect all virtual domains. When virtual domains are
enabled, only accounts with the default super_admin profile can access global settings.
Table 7: Global configuration settings
Configuration Object For more information, see
System
Status System Time “Configuring system time” on page 78
Status Host name “Changing the FortiGate unit host name” on page 78
Status Firmware
version “Upgrading to a new firmware version” on page 80 (System
Status page) or “Managing firmware versions” on page 91 .
Network Interfaces and
VLAN subinterfaces “Interfaces” on page 119 and “VLAN overview” on page 150
(You configure interfaces as part of the global configuration
but each interface and VLAN subinterface belongs to a
VDOM. You add interfaces to VDOMs as part of the global
configuration.)
Network Options DNS “DNS Servers” on page 146
Network Options Dead
gateway detection “Dead gateway detection” on page 146
Admin Settings Idle
and authentication
time-out “Settings” on page 228 and “Getting started - User
authentication” on page 567
Admin Settings Web-
based manager
language “Settings” on page 228
Admin Settings LCD
panel PIN, where
applicable “Settings” on page 228
Wireless Settings “Wireless settings” on page 162