Fortinet FortiWAN, Handbook

Page: 278 / 311

Reports Bandwidth Usage
Export reports and send reports through email (See " Export and Email ").
Statistics Table
l
Group: Tunnel Group configured on FortiWAN; the failed TR link belongs to. Select “Group” as primary sorting via
clicking on the column title “Group”.
l
Local IP: Local IP address of the failed TR link in the Tunnel Group. Select “Local IP” as primary sorting via clicking
on the column title “Local IP”.
l
Remote IP: Remote IP address of the failed TR link in the Tunnel Group. Select “Remote IP” as primary sorting via
clicking on the column title “Remote IP”.
l
Fails: the count of failures occurring on the IP pair in this Tunnel Group for the reporting period.
l
Drill in: Click to check the status (OK and Fail) of the TR link (See " Drill In ").
l
Note: A “▲” or “▼” is shown aside the column header while the column is selected as primary sorting, e.g. Group
▲. The sorting order will be switched by clicking on the same column header.
TR Status
The TR Status report shows the statuses of every FortiWAN’s TR link (See "
Tunnel Routing
") by date the range
defined.
Create a report for a specific day or over a range of dates (See " Create a Report ").
Export reports and send reports through email (See " Export and Email ").
The various statuses are defined as below.
l
OK: TR link is enabled, configured and connected physically.
l
Fail: TR link is enabled and configured, but disconnected.
l
Disable: TR link is not enabled from FortiWAN Web UI.
Statistics Table
l
Lists the statuses of every TR link by the date range defined.
l
Time: Time periods or dates if a date range is defined.
l
Local IP: Local IP address of the TR link.
l
Remote IP: Remote IP address of the TR link.
l
Status: the OK/Fail Status of this Source IP -> Destination IP pair at that time.
Bandwidth Usage
This report category is the core function of the Reports and also serves as the basis for traffic analysis to gain insights
for better policy management. This category can further be divided into In Class, Out Class, WAN, Service, Internal IP
and Traffic Rate.
The Bandwidth Usage Report includes: Charts (upper) and Statistics Table (lower).
l
Pie Charts display respective percentage of all the traffic patterns that sorted (default) by the total data volume (IN
+ OUT) shown on the page. The Pie Charts display will change depending upon which column in the Statistics
Table is selected for primary sorting. This Pie Chart shows the percentage of the traffic pattern of the top 10 items
278 FortiWAN Handbook
Fortinet Technologies Inc.