Reports
Device Status
Version
:
The firmware version of the slave.
Model/Bandwidth
:
The model and Max. bandwidth of the slave.
Serial Number
:
The serial number of the slave.
Uptime
:
The time the slave has been up and running.
State
:
Normally, this field displays “Slave”.
During the procedure of reboot, this field displays "Rebooting".
System panic happens, this field displays "Panic".
Peer unit is lost (power-off or Ethernet cable disconnected), this field displays
"None".
Firmware version, FortiWAN model or throughput license is inconsistent with the
local unit, this field displays "Incompatible".
Hard Disk
FortiWAN's Reports functions with a database system and necessary log data stored in the built-in hard disk. Disk
space is being consumed by increasing report database. Once the disk space is ran out, Reports will fail to continue
log processing. Disk usage statistics viewer here reports the disk space usage (%), so that an appropriate cleanup (See
"
" and "
") can be took to low disk space.
Free space
:
The available disk space.
Other used
:
The disk space used for disk overhead or preallocation.
DB used
:
The disk space used by Reports' database.
Bandwidth
The Bandwidth report shows the traffic distribution by the date range defined. Your FortiWAN model is rated by its
data throughput (and number of simultaneous connections). This report will help you determine if you are using the
correct FortiWAN model and bandwidth capability for the data volumes at our location.
Create a report for a specific day or over a range of dates (See "
").
Export reports and send reports through email (See "
").
Bandwidth Distribution:
l
X axis: Time between 00:00 to 23:59 (of a selected date). Days from start to end if Date Range specified (max 90
days) .
l
Y axis: Bandwidth in Kbps or Mbps.
l
Green indicates inbound data rate.
l
Blue indicates outbound data rate.
274
FortiWAN Handbook
Fortinet Technologies Inc.
