Tunnel Traffic
Statistics
Opposite Subnet
:
Shows opposite unit subnet used in tunnel routing default rules.
Tunnel Traffic
It collects inbound/outbound traffic statistics regarding tunnel routing in the past 60 minutes, 24 hours, and 30 days.
Statistics are displayed on chart.
Traffic Type
:
Traffic flow direction.
Time
:
Collect statistics in the past 60 minutes, 24 hours, and 30 days.
Tunnel Routing Group
:
Select a group from the list. Depending on N tunnels the group gets, N statistical
charts will show.
IPSec
IPSec Statistics reports the usages and states of your configured IPSec Security Associations (See "
"). Go to
Statistics > IPSec
, a select bar and two statistics tables are displayed.
Selector
Select the combination of Mode and Phase 1 here, and then the statistics of related IPSec SAs are reported.
Mode
Select the mode, Tunnel mode or Transport mode, of the security asso-
ciations that you ask for.
Phase 1 Name
All the configured Phase 1 names of the mode you selected above are
list in the drop-down menu. Select a Phase 1 name (ISAKMP SA) to dis-
play the statistics of the associated IPSec SAs (Phase 2).
Refresh
Click to refresh the statistics page.
Statistics of the IPSec SAs associated to the ISAKMP SA you selected is displayed in two tables, Security Association
Database and Security Policy Database.
Security Association Database
List information of each IPSec SA including local and remote IP addresses, negotiated encryption and authentication
algorithms, timing and the states.
Local IP
The local IP address of the IPSec SA.
FortiWAN Handbook
Fortinet Technologies Inc.
251
