© Copyright 2007 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trade-
marks of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
28 September 2007
Checking the Package Contents
Connecting
Planning the Configuration
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
Documentation
FortiAnalyzer-800B
Copyright 2007 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Power Cable
Null-Modem Cable
(RS-232)
Q u i c k S t a r t G u i d e
Ethernet Ports
1 and 2
DB-9
Serial
Connection
Power
Connection
Ethernet Ports
3 and 4
Power Switch
LED indicators:
Power, Error, Network,
and Disk Access
2 Mounting Slide Rails
Straight-through Ethernet cables connects
to hub or switch on the network
Null modem cable connects
to serial port on management computer
Power cable connects
to power outlet
Place the FortiAnalyzer unit on a stable surface.
Use included mounting slide rails to mount on a standard 19” rack.
Connect one end of Ethernet cable to port 1, the other to the network hub or switch.
Make sure the power is not plugged into the wall before connecting the power cable.
•
•
•
•
Connect the FortiAnalyzer unit to a power outlet and to the network hub or switch.
FortiAnalyzer-800B
05-30005-0417-20070928
FortiAnalyzer LED Indicators
Light Icon
State
Description
Green
The correct cable is in use and the equipment has
power.
Flashing Green
Network activity at this interface.
Off
No link established or the FortiAnalyzer unit is off.
Green
Hard disk activity.
Off
No hard disk activity
Green
The FortiAnalyzer unit is running normally.
Flashing Green
The FortiAnalyzer unit is running abnormally.
Off
The FortiAnalyzer unit is powered off.
FortiAnalyzer Front Buttons
Power button.
Reset button.
Connector
Type
Speed
Protocol
Description
Ports 1 to 4
RJ-45
10/100/1000
Ethernet
Connection to the network
CONSOLE
DB-9
9600 bps
8/N/1
RS-232 serial Connection to the management computer. Provides
access to the command line interface (CLI).
USB
USB
USB
For future use.
You can add the FortiAnalyzer unit to your local FortiGate network to receive log messages
from your local FortiGate units.
Connect the FortiAnalyzer unit to the same hub or switch as the FortiGate unit. You can also
connect the FortiAnalyzer unit to multiple FortiGate units or remote FortiGate units over the
Internet . To connect the FortiAnalyzer unit to the FortiGate units remotely, you must config
-
ure the DNS server and the default gateway.
You can manage the FortiAnalyzer unit within the local network or over the Internet.
Factory Defaults
Administrator Account
User name:
admin
Password:
(none)
Port 1
IP:
192.168.1.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
Port 2
IP:
192.168.2.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
Port 3
IP:
192.168.3.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
Port 4
IP:
192.168.4.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
