Devices
Adding a Syslog server
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925
73
4
Expand the Devices Privileges settings.
5
Set the privileges the FortiManager unit has to the FortiAnalyzer unit.
Select Allow all devices managed by FortiManager to have full access to the
FortiAnalyzer unit and to Allow the FortiManager to configure the FortiAnalyzer
unit.
6
Expand the Group Membership settings.
7
Select the group or groups where you want to include the FortiManager unit, and
select the right arrow button to add the FortiManager unit to the group.
8
Select OK.
Adding a Syslog server
Before adding a syslog server to the FortiAnalyzer unit, you must first configure
the server to send log packets to the FortiAnalyzer unit. See your syslog server
documentation for information on directing log packets.
The FortiAnalyzer unit adds the syslog server to the list of unregistered devices.
The FortiAnalyzer unit will not accept the log packets until you configure the
FortiAnalyzer unit to accept the connection form the server.
To add a syslog server to the FortiAnalyzer
1
Go to
Device
>
All
.
2
Select Unregistered from the Show list, and select Add from the Action column for
the syslog device.
or
Select Add Device.
3
Set the following options.
Device Type
Select Syslog from the device list. It is selected by default when
selecting a syslog server from the unregistered list.
Device Name
Enter a name to represent the Syslog server.
IP Address
Enter the IP address of the Syslog server. The IP address will
already appear when selecting a syslog server from the
unregistered list.
Description
Enter additional information for the Syslog server up to 128
characters long. Description information appears when you hover
the mouse over the Syslog server’s name in the devices list.
Administrative
Domain
Select the administrative domain (ADOM) that the device will be
associated with. This selection is visible when using the ADOM
feature. For more information on ADOMs, see
Allocated Disk Space
(MB)
Set the amount of the FortiAnalyzer hard disk is allocated to log
and content files for the device. A disk space setting of zero is
unlimited.
When Allocated Disk
Space is All Used
Select what the FortiAnalyzer unit should do once the allocated
disk space has been reached. Select from overwriting older files or
stop logging.
Summary of Contents for FortiAnalyzer-100A
