FortiAnalyzer Version 3.0 MR3 Administration Guide
54
05-30003-0082-20060925
Configuring the FortiAnalyzer unit
Configure the FortiAnalyzer unit
To import the alias file
1
Go to
System
>
Config
>
IP Aliases
.
2
Select Import.
3
Enter the path and file name or select Browse to locate the file.
4
Select OK.
IP alias ranges
When adding an IP alias you can include an IP address range as well as individual
addresses. The range can include an address range and wild cards. For example:
• 10.10.10.1 - 10.10.10.50
• 10.10.10.1 - 10.10.20.100
• 10.10.10.*
RAID
Configuring RAID on the FortiAnalyzer-400 and
FortiAnalyzer-800
The FortiAnalyzer-400 and FortiAnalyzer-800 have four hot swappable hard disks.
Hot swapping is available when running the FortiAnalyzer unit with RAID level 1
and 5.
To set the RAID level, go to
System
>
Config
>
RAID
.
For details on the different RAID levels, see
.
Figure 17: FortiAnalyzer-400 RAID settings
!
Caution:
Note that if you change RAID levels, the FortiAnalyzer unit reformats the hard
disks to support the new setting. It is extremely important that you back up all information
before changing the RAID level.
Summary of Contents for FortiAnalyzer-100A
