Configure the FortiAnalyzer unit
Dashboard
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925
35
9
The IP address can be any IP address that is valid for the network the interface is
connected to. Make sure you do not enter the IP address of another device on this
network.
The following message appears:
Enter File Name [image.out]:
10
Enter the firmware image file name and press Enter.
The TFTP server uploads the firmware image file to the FortiAnalyzer unit and
displays the following message:
Save as Default firmware/Backup firmware/Run image without
saving:[D/B/R]
11
Type D.
The FortiAnalyzer unit installs the new firmware image and restarts.
Changing the firmware
Use the following procedure to upgrade the FortiAnalyzer unit to a newer firmware
version or revert to a previous firmware version.
If you are reverting to a previous firmware version, the procedure reverts the
FortiAnalyzer unit to its factory default configuration.
When you upgrade the firmware, the FortiAnalyzer unit maintains the your
configuration settings.
Back up the FortiAnalyzer unit configuration before beginning this procedure. For
information, see
To change the firmware using the web-based manager
1
Copy the firmware image file to your management computer.
2
Log on to the web-based manager as the administrative user.
3
Go to
System
>
Dashboard
.
4
Select Update in the System Information area.
5
Type the path and file name of the firmware image file, or select Browse and
locate the firmware image file.
6
Select OK.
If you are reverting to a previous version of the firmware, a message appears
informing you the system configuration will be set to default and all the original
configuration will be lost.
7
Select OK.
• If you upgrade the firmware, the FortiAnalyzer unit uploads the firmware image
file, upgrades to the new firmware version, restarts, and displays the
FortiAnalyzer login. This process takes a few minutes.
Note:
If you revert to a previous firmware version, because the configuration is reset, you
will need to reconfigure the IP address from the front panel of the FortiAnalyzer-100 and
FortiAnalyzer-400, and the console for the FortiAnalyzer-800 and
FortiAnalyzer-100A/100B.
Summary of Contents for FortiAnalyzer-100A
