Fortinet FortiAnalyzer-100A, Administration Manual

Page: 136 / 162

FortiAnalyzer Version 3.0 MR3 Administration Guide
136 05-30003-0082-20060925
Output Alerts
Your SNMP manager might already include standard and private MIBs in a
compiled database that is ready to use. You must add the Fortinet proprietary MIB
to this database. If the standard MIBs used by the Fortinet SNMP agent are
already compiled into your SNMP manager you do not have to compile them
again.
FortiAnalyzer traps
The FortiAnalyzer unit can send traps to SNMP managers that you have added to
SNMP communities. To receive traps, you must load and compile the Fortinet 3.0
MIB into the SNMP manager.
The FortiAnalyzer unit supports the following MIBs and traps:
FortiGate MIB System Traps
• fnTrapCpuHigh
• fnTrapMemLow
• fnTrapIpChange
FortiGate MIB Logging Traps
• fnTrapLogFull
FortiGate MIB VPN Traps
• fnTrapVpnTunUp
• fnTrapVpnTunDown
• fnTrapFlgEventCountþ
Fortinet MIB System fields
• fnSysModel
• fnSysSerial
• fnSysVersion
• fnSysCpuUsage
• fnSysMemUsage
• fnSysSesCount
• fnSysDiskCapacity
• fnSysDiskUsage
• fnSysMemCapacity
Fortinet Administrator Accounts
• fnAdminNumber
• fnAdminIndex
• fnAdminName
• fnAdminAddr
Fortinet Options
• fnOptIdleTimeout
• fnOptLanguage