FIM-7941F interface module
Fortinet Technologies Inc.
FIM-7941F front panel
Power
Slider
Module
Lever
Secure
Screw
Module
Lever
Console
port
SSD
log
disks
Power
Slider
Secure
Screw
1 to 18
100/40GigE fabric channel
QSFP28 data network
interfaces
M1 and M2
100/40GigE base
channel QSFP28
management
interfaces
19 and 20
400/100GigE fabric channel
QSFP-DD data network
interfaces
M3 and M4 25/10GigE base
channel SFP28 management interfaces
MGMT1 and MGMT2
10/100/1000BASE-T copper
management interfaces
Status, alarm
HA, and power
LEDS
USB
Power and
NMI buttons
Mounting hardware
Use the module levers, power sliders, and secure screws to insert, secure and remove the module from the chassis.
Module levers
Carefully slide the module all of the way into the chassis slot and fully close the module levers to seat the module into the
chassis slot and to connect the module to the chassis backplane connectors. When both module levers are fully closed,
the power sliders can be lowered to their bottom position, locking the module levers and turning on power to the module.
Raise the power sliders to unlock the module levers and turn off module power. Then open the module levers to eject the
module from the backplane connectors; allowing the module to be removed from the chassis.
The module lever mechanism helps reduce the engagement force required to insert or eject the module from the
backplane connectors.
The module levers do not fully secure the module in the chassis. The secure screws must be tightened to reliably secure
the module in the chassis and to make sure the module remains securely connected to the backplane for power and
network connectivity.
Power sliders
Close the module levers and move the power sliders to their bottom position to lock the module levers and turn the
module power switch on.
Move the power sliders to the top position to unlock the module levers and turn the module power switch off.
FIM-7941F 6.4.8 Interface Module Guide
6