FIM-7920E interface module
Physical Description
l
One 1Gbps base backplane channel for base backplane with each FPM module installed in the same chassis as the
FIM-7920E.
l
One 40Gbps fabric backplane channel for fabric backplane communication with the other FIM-7920E in the chassis.
l
One 1Gbps base backplane channel for base backplane communication with the other FIM-7920E in the chassis.
l
On-board DP2 processors and an integrated switch fabric to provide high-capacity session-aware load balancing.
l
One front panel USB port.
l
Power button.
l
NMI switch (for troubleshooting as recommended by Fortinet Support).
l
Mounting hardware.
l
LED status indicators.
Physical Description
Dimensions
1.2 x 11.34 x 14 in. (3.1 x 28.8 x 35.1 cm) (Height x Width x Depth)
Weight
7.2 lb. (3.23 kg)
Operating Temperature
32 to 104°F (0 to 40°C)
Storage Temperature
-31 to 158°F (-35 to 70°C)
Relative Humidity
10% to 90% (Non-condensing)
Front panel LEDs
From the FIM-7920E font panel you can view the status of the module LEDs to verify that the module is
functioning normally.
LED
State
Description
STATUS
Off
The FIM-7920E is powered off.
Green
The FIM-7920E is powered on and operating normally.
Flashing
Green
The FIM-7920E is starting up.
ALARM
Red
Major alarm.
Amber
Minor alarm
Off
No alarms
FIM-7920E Interface Module Guide
Fortinet Technologies Inc.
6
Summary of Contents for FIM-7920E
Page 1: ...FIM 7920E Interface Module Guide 7000 ...
Page 4: ...China 26 ...