Example FortiGate Voice branch office configuration
Configuring the FortiGate Voice PSTN and PBX settings
FortiGate Voice Version 4.0 Administration Guide
01-400-112851-20100127
19
•
3
Select OK.
To configure basic PBX system and voicemail notification settings
Use the following procedure to configure PBX system settings and voicemail notification
settings that affect the overall performance of the PBX service and all of the users of it.
Usually you would configure these settings once and rarely thereafter.
1
Go to
PBX > Config > System
.
2
Configure the following settings.
3
Select Apply to save the changes.
4
Go to
PBX > Config > Voicemail Notification
.
5
Configure the following settings.
Caller ID Protocol
Select the caller ID protocol required by PSTN line that the fxo
interface is connected to. Contact your service provider for the name
of the protocol to use.
Caller ID Indicator
Select the caller ID indicator required by the PSTN line. Contact your
service provider for details.
Ring #
Set the number of rings to wait before receiving caller ID information.
In most cases, enter 1 to send caller ID information between the first
and second ring.Contact your service provider for details.
Hang-up Options
Configure the following options to configure how the FortiGate Voice
unit hangs up calls from the PSTN.
Hang up on Polarity
Reversal
Select if the PSTN line uses polarity reversal to indicate a call has
been hung up. Contact your service provider for details.
Hang up on Busy Tone
Select if you want the FortiGate Voice unit to hang up automatically
when it receives a busy tone when attempting to dial a number on the
PSTN.
Busy Tone Detection #
The number of busy tones that the FortiGate Voice receives before
hanging up if
Hang up on Busy Tone
is selected.
Busy Tone Duration
Tune the FortiGate Voice unit to accurately detect busy tones on this
PSTN line. You can change the default settings if busy tones are not
accurately detected.
Busy Tone Interval
Administrative Status
Set to
Up
if the fxo interface is connected to the PSTN and you want
to be able to receive and send calls on this PSTN interface.
Extension Range
_6XXX
Use the extension range to create a pattern that defines the valid
extensions that can be added to the FortiGate Voice
configuration. Extensions can include number or letters and you
can define the number of characters that are required. In this
extension range pattern:
•
_ indicates the extension range is a pattern. The _ is always
required.
•
6 indicates the extensions must start with the number 6.
•
XXX indicates the extensions must have three numerical
digits following the 6.
Voicemail Access
*97
Phone users on the internal network can dial *97 to get their
voicemail.
Max Voicemail Duration
60 seconds
Limits a single voicemail message to 60 seconds.
Summary of Contents for Voice
Page 49: ...www fortinet com ...
Page 50: ...www fortinet com ...
