First Installation
9
4.
First Installation
Position of connectors and controls
All the connectors for power and cables are located at the bottom of the back side of the display. The OSD keyboard is located at the
top of the back side.
Position
of
the
OSD
keyboard
Position of the connector for ambient light sensor
Position of the connectors for power and signal cables
Mounting with VESA compliant monitor brackets
VESA- mounting points
The POS Line monitor has an integrated VESA mounting.
The operating position of the device is perpendicular (90 degrees to the floor). For wall mounting, the permissible tilt angle is observed.
The device can be operated only in landscape mode.
VESA formats:
VESA 200x100 POS Line
