background image

9

•  Prior to each start-up, check residual-current circuit-

breaker for proper operation in line with the procedure 
as described in the “before each start-up” chapter. It is 
forbidden to operate the machine with faulty residual-
current circuit-breaker, as it may pose a threat of 
electric shock!

•  Do not submerge the machine or any of its components 

in water or any other fluids.

•  It is strictly forbidden to use the machine in explosive 

areas.

•  Never use the machine close to toxic / hazardous 

substances.

•  Never install the machine on temperature-sensitive 

foundations.

•  Do not leave the machine in places exposed to the forces 

of nature.

•   Do not operate machine buttons / valves using excessive 

force.

•  The machine should be installed on stable level ground. 

Make sure that its front wheels are secured during 
operation.

•  Never block the gun’s trigger.
•  Never leave the machine working unattended.
•  Do not direct steam jet towards electronic devices.
•  While washing your car, make sure that the nozzle is 

more than 10 cm away from the surface.

• 

When not in use, the machine should be switched off and 

drained.

•  Use only good quality fuel diesel. Use of any fuel 

other than diesel, or any fuel that is contaminated or 
diluted, may result in damage to the burner and loss of 
guarantee.

•  Remember that the hose bending radius can never be 

lower than 10 cm. Bending the hose to a tighter radius 

results in teflon breaking, and, in consequence, in hose 

damage.

•  Operating pressure can be dangerous for people and 

animals.

•  Operators should be sober, adult, and trained in machine 

operation and maintenance.

• 

Spare parts cannot be different than those 

recommended and manufactured by the manufacturer.

•  In case power supply cable is damaged, it must be 

replaced by an authorised service-provider under pain of 
loss of guarantee.

• 

Water tank must be filled with tap water only. Do not 

add any detergents, chemicals, or descaling agents to the 
water tank.

•  Do not use distilled water!

•  Before starting the machine, check if its operational 

openings are free from dirt.

•  It is only allowed to use original hoses and guns.
•  Do not start the machine if its electrical cable or any 

other part is damaged.

•  Do not operate the machine in the rain or when it is wet.
•  Never tilt or topple the machine when switched on.
• 

Always switch off the machine before cleaning.

•  Children are absolutely not allowed to contact the 

machine.

•  Be careful while working near children or animals.
•  Do not use the machine when damaged or when its 

power supply cable shows any signs of damage. In case 
the machine fails to work the way it should, if it fell or 

got damaged or was left outdoors or flooded, contact 

our service dept.: [email protected] 

•  Do not try to pull or lift the machine by its power supply 

cable or hose.

• 

Watch for hoses, guns, filters, and seals. As consumables, 

they are covered by limited guarantee only.

•  Never direct steam towards people or animals.
• 

Keep the machine away from naked flame, radiators, 

ovens or any other heat sources.

• 

Do not use the machine in any confined, insufficiently 

ventilated areas. Its fumes may pose a threat to your 
health.

•   Do not operate the machine in an environment with very 

high humidity of the air and/ or highly dusted areas.

•  When in operation, the machine should not be moved. 

•  The machine should be connected to electrical 

installation that is provided with reliable earthing. 
It is forbidden to operate the machine connected to 
electrical installation no earthing, as it may pose a 
threat of electric shock!

Summary of Contents for Volt S





























Reviews: