4
6 Maintenance/Testing
Please observe the maintenance instructions:
-
The mechanical felling wedge TR24 must undergo a visual inspection for damages
before each use.
-
Make sure that the threaded spindle/nut is sufficiently lubricated before each use.
Lubricate the threaded spindle/nut at the grease nipple provided for this purpose
and rotate the spindle once both ways.
The nut must be checked regularly for wear.
-
Make sure that the surfaces between wedge and spring steel plates are lubricated
before each use. This way, the wear is lessened and the applied force necessity of
the operator significantly reduced.
-
Keep the mechanical felling wedge clean at all times to increase its service life.
-
Only original spare parts may be used. Contact your local dealer for more
information.
- The following lubricant was used for the initial lubrication:
Fuchs Gleitmo 805 – white high-performance lubricant for long-term lubrication
7 Tips
-
Regularly switching the two steel plates is recommended to account for the loads
varying between top and bottom due to askew placement. Thus, creating less bend
in the spring steel plates.
-
If the spring steel plates are bent, they can simply be set by hand.
Summary of Contents for TR 24
Page 6: ...5 8 Exploded View ...
