14
WWW.FORNEYIND.COM
Step 4:
Press in on the Mechanism Cover Release (F) to open the cover. Rotate the cover all the way forward
out of the way. Rotate the Wire Tension Adjustment Knob (G) counterclockwise to unlock the tension
mechanism. Rotate the entire Wire Tension Adjustment Knob armature upward to release the Idler Arm (K).
Step 3:
Install the spool of wire on the main shaft ensuring that the wire is feeding from the bottom of the spool.
Insert the free end of the wire into the wire inlet guide at the base of the spool compartment. Re-install Wire
Spool Retention Nut (J).
Step 2:
•
Remove the Wire Spool Retention Nut (J) (Shown Below):
