background image

31

3.  This warranty does not cover damages resulting from: 

 

a.  Incorrect transport and installation. Incorrect installation refers to failure 

to follow the safety guidelines and instructions outlined in the Instructions 

manual.

 

b.  Unintended and inappropriate use of the product. Unintended and inappropri-

ate use refers to use of the product for purposes different from those for which 

it was specifically designed and manufactured. Some unintended purposes in-

clude cross country and UCI sanctioned downhill races.

 

c.   Use of materials or spare parts that do not carry the Formula trademark THIR-

TYFIVE forks. FORMULA S.a.s. shall not guarantee conformity, safety, service 

life and performance of Formula THIRTYFIVE forks if materials and spare parts 

that do not carry the Formula trademark and/or are non-compatible and/or 

are not suitable and/or are not expressly authorized are used. 

 

d. Lack of appropriate or reasonable maintenance or storage, washing with 

harsh materials, use of corrosive agents, prolonged exposure to solvents. 

 

e.  Products on which the serial number and/or production code have been al-

tered, damaged and/or removed. 

 

f.  Modifications made by persons not duly authorized by Formula without being 

approved by Formula. 

 

g.  Normal wear and tear or deterioration due to the use of the product. 

 

h.  The result of rider mishap or crash. 

 

4.  Retailers, wholesalers, importers or anyone else apart from FORMULA S.a.s. may not modify 

this warranty in any way.

5. This warranty does not affect the statutory rights of the consumer or any rights the purchaser 

may have against the dealer pursuant to the sales contract. 

6. The laws of Italy govern all matters arising out of or relating to this warranty. Any disputes or 

legal actions by purchaser arising out of or relating to this warranty shall be brought in court 

in Prato.

Summary of Contents for THIRTYFIVE QR15



















Reviews: