711 Ogden Ave. Lisle, IL, 60532, USA
tel# 1-630-964-8000,
WWW.LOCKFORMER.COM
Ver. US-03-2005
Page 1
CHEEK BENDER
Double sided 24” Model
Instructions
MOUNTING UNIT
Place the cheek bender on
work table so that sufficient
clearance is available for
bending the maximum size
section. Make sure that the
unit is placed so the open end
over hangs the table. When
the unit is in the most desired
work position, fasten it to a
work table or bench.
Place handles into the pivot
bar holes and lock them into
place with Allen head screws.
OPERATION
Place the edge to be formed into the slot and move the handle to make a bend.