28
8. Extend the unit’s feet by unscrewing them from the leg until there is a gap of approximately
13 mm (0.5 in) between the top of each foot and the bottom of its respective leg.
9. Orient the tie down brackets facing diagonally inwards, hooking the brackets around the
unit’s feet bolts.
10. Secure the machine to the pallet using the included M6 × 45 mm lag bolts.
11. Encase the front and the back of the machine with a
C-fold segment (2), respectively.
12. Place the topper (3) on top of the C-fold segments.
13. Wrap a nylon binding strap (commercially available)
horizontally around the C-folds. Position the strap
approximately 50 cm (20 in) up from the bottom of
the C-fold. Tighten and crimp the strap.
14. Loop two nylon binding straps vertically around
the machine, passing them underneath the pallet.
Position the two straps approximately 25 cm (10
in) from the left and right sides of the machine,
respectively. Tighten and crimp the straps.
