Preparation and setup |
23
To unbox the machine:
1. Position the Fuse Sift’s packaging near the designated area, leaving enough room for
two people to comfortably maneuver throughout the area. Stand the packaging upright
to ensure it is level.
2. Open the Fuse Sift’s box from the top by removing the lid, then consecutively remove the
two C-shaped shells.
3. Locate the accessories box sitting on the pallet underneath the Fuse Sift. Open the
accessories box and remove the lifting straps and wrench inside.
4. Locate the four steel brackets holding the unit’s feet to the pallet. Use the included wrench
to remove the 12 bolts, then disengage the brackets from the Fuse Sift. Retain all fastening
hardware for future use.
5. Loop both lifting straps under the machine from left-to-right, ensuring that the straps are
not crossed. With one person on each side, insert your forearms into each loop so they
do not go past your elbows.
6. With your back straight and knees slightly bent, brace against the machine with your palms
as you and a second person lift the unit up.
7. Carefully move the machine into its workspace and set the unit down gently.
If you need to readjust the machine, use the lifting straps to pick it back up. Do not
pick up the machine without lifting straps.
8. Remove any additional wrapping and packaging from the outside of the Fuse Sift before
connecting the machine to power.
9. Remove the Fuse Sift tool shelf from the pallet. Hang the tool shelf from the pegs running
along the bottom of the vent at the back of the Fuse Sift workspace.
10. Remove the surface grate from the accessories box and place it over the sifter.
11. Remove the vacuum hose from the accessories box. Plug it into the vacuum port on the
inside-left wall of the Fuse Sift.
12. Remove the parts basket and cleaning tools from the accessories box and place them in
the workspace.
13. Remove the powder catch from the accessories box and place it on the bottom of the build
chamber enclosure.
14. Remove the build chamber port cover from its sleeve and place it over the build chamber
port, closing the space at the top of the build chamber enclosure.
15. Remove the power cord from the accessories box and connect the machine to power.
The original packaging is designed to be kept and reused for transporting or shipping the
machine for service. Save the complete packaging including any inserts for your convenience.
4.4
Accessing the serial name
For detailed guidance and visual assistance, visit
support.formlabs.com
.
The serial name is a unique identifier used to track the history of manufacturing, sales, and repair.
The serial name for the Fuse Sift is located on a sticker next to the A/C input on the back panel in
the format
AdjectiveAnimal
. For a Fuse Sift, the serial name is also available on the touchscreen.
NOTICE
NOTICE
