Usage |
23
5
Usage
5.1
Operational environment
•
Ventilation:
At least six air exchanges per hour
•
Temperature:
18–28 °C (64–82 °F)
•
Power:
°
Dedicated power outlet and circuit capable of delivering 1 A of current
°
Easy access to the power switch of the device
•
Location:
Dry, indoor
•
Altitude:
Maximum 2000 m (6561.7 ft)
•
Humidity:
Low ambient humidity
•
Mains supply voltage fluctuations:
≤ 10%
•
Pollution degree of intended environment:
2
5.2
Washing printed parts
The Form Wash L removes uncured resin from the surface of printed parts by simultaneously soaking
and moving them in a solvent. For detailed guidance and visual assistance, visit
.
5.2.1
Inserting printed parts
The Form Wash L can wash printed parts either before or after they have been separated
from the build platform.
To insert printed parts for cleaning:
1. Use the touchscreen to raise the platform and basket mounts.
2. Insert printed parts:
a.
Form 3L Build Platform:
Place the build platform with printed parts directly in the Form
Wash L to clean parts before removal. Align the top lip of the build platform with the arms
of the platform mount, and fully insert to touch the back.
b.
Form 3 Build Platform:
Place the platform mount adapter, stored on the inside of the
Form Wash L door, on the arms of the platform mount. Align the top lip of the build
platform with the arms of the platform mount adapter, and fully insert to touch the back.
c.
Individual printed parts:
Place parts directly in the basket after removing them from
the build platform using the removal tool, scraper, or flush cutters. The basket comes
installed in the Form Wash L.
a
b
c
Summary of Contents for Form Wash L
Page 1: ...Manual Form Wash L...
Page 2: ......
Page 6: ......
Page 46: ...Original English instructions November 2021 Formlabs...
