formlabs Form Wash L, Manual

Page: 19 / 46

Preparation and setup | 17
4 Preparation and setup
4.1 Location and environs
Prepare a space to install and operate the Form Wash L and house the necessary accessories
and consumables.
To prepare the workspace:
• Ensure that the workspace meets the following requirements:
°
Dry, indoor location
°
Maximum altitude of 2000 m (6561.7 ft)
°
Low ambient humidity
°
Mains supply voltage fluctuations ≤ 10%
°
Pollution degree of intended environment: 2
• Operate the device in a well-ventilated room (≥ 3 air exchanges per hour) with a temperature
of 18–28 °C (64–82 °F).
• Due to flammable vapors, place the device at least 0.9 m (3 ft) from other electrical equipment.
• Installation should include appropriate signage (“No Smoking,” etc.) to indicate that open
flames must be kept away from the device.
• Position the device so that it is easy to operate the power switch of the unit.
• Dedicate a power outlet and circuit to the device capable of delivering 1 A of current.
4.2 Power and networking
For detailed guidance and visual assistance, visit support.formlabs.com .
The Form Wash L requires reliable grounding. The power supply used with the
device must be grounded. Do not use an inadequately-rated power cable with the
Form Wash L.
For remotely monitoring the device, ensure it maintains a constant connection to a secured
network. Refer to section 4.6 Setting up a network connection for more information.
4.3 Unboxing the machine
For detailed guidance and visual assistance, visit support.formlabs.com .
Prior to unboxing, ensure that the suitable workspace has been prepared according to section
4.1 Location and environs.
4.3.1 Receiving
Shipping dimensions Shipping weight Product dimensions Product weight
96.2 × 59.7 × 82.7 cm
37.9 × 23.5 × 32.6 in
64.7 kg
142.6 lb
78 × 46 × 67 cm
30.7 × 18.1 × 26.4 in
56.7 kg
125 lb
4.3.2 Unboxing
The custom packaging the Form Wash L arrives in is specially designed to protect the machine
during shipping. During unboxing, inspect the product for any damage or missing items. In the
case of damage or missing items, contact
Formlabs Support or a certified service provider .
NOTICE