formlabs Form Wash L, Manual

Page: 11 / 46

Introduction | 9
2.2 Technical specifications
Visit formlabs.com for additional information on technical specifications.
Parameter Unit
Unit Form Wash L
Installation surface Floor-standing unit
Minimum dimensions for convenient
access
(W × D × H)
100 × 120 × 120 cm
40× 48 × 48 in
Product dimensions (W × D × H) 78 × 46 × 67 cm
30.7 × 18.1 × 26.4 in
Product weight 56.7 kg (without solvent)
125 lb (without solvent)
Wash bucket dimensions (W × D × H) 54 × 28 × 41 cm
21.3 × 11.0 × 16.1 in
Wash bucket capacity 43 L
11.4 US gal
42 L (11.1 US gal) minimum to reach build platform
12 L (3.2 US gal) minimum to submerge solvent monitor
Maximum part size (W × D × H) 33.5 × 20 × 30 cm
13.2 × 7.9 × 11.8 in
Compatible solvents Isopropyl alcohol (IPA)
Tripropylene glycol monomethyl ether (TPM)
Water
Operating environment 18–28 ºC
64–82 ºF
Power requirements Input (NA): 100–120 VAC, 50–60 Hz, 1 A max
Input (EU): 220–240 VAC, 50–60 Hz, 1 A max
Connectivity Wi-Fi: 2.4 GHz
Ethernet: 100 Mbit
USB: 2.0
Wi-Fi connectivity Protocol: IEEE 802.11 b/g/n
Frequency: 2.4 GHz
Supported security: WPA/WPA2
Ethernet connectivity RJ-45 Ethernet (10BASE-T/100BASE-TX) LAN port
Connect with a shielded Ethernet cable (not included):
minimum Cat5, or Cat5e or Cat6.
USB connectivity USB (rev 2.0) B port with a USB A-B cable
Sound emission Does not exceed 79.5 dB(A).
Unit control Interactive touchscreen
Alerts Touchscreen alerts