manualshive.com logo in svg

formlabs Form Cure, Manual

Share
Download
formlabs Form Cure Manual Download Page 25

Maintenance | 

25

6.5.1 

Updating the Form Cure Firmware

Formlabs regularly releases updated firmware to fix bugs and improve functionality. Review 
the PreForm and firmware release notes to learn more about the improvements that come 
with each version’s release.
To update the firmware:
1.  Connect the Form Cure with a USB cable to a computer running the latest version of PreForm.
2.  Locate and run the Form Wash/Cure Updater tool in the PreForm installation folder to check 

for firmware updates and to update the firmware.

3.  When the updater tool detects the unit, select 

Update Firmware.

4.  The tool uploads the new firmware and restarts the unit to complete the update. The update 

should take approximately 20 seconds. The turntable may rotate during firmware updates.

Do not disconnect the USB or power cables during the update.

5. 

Firmware Up To Date

 appears next to the connected unit in the main updater window. 

Select 

Done

 once the update is complete.

6.  Repeat steps 1–5 to update firmware on additional Form Cure units.
7.  Select 

Quit

 to close the updater.

NOTICE

Summary of Contents for Form Cure
































Reviews:

No comments

Brands by name

Popular brands

Load more brands