64
Chapter 3 Advanced Operation
1
Touch the
key on the [Ready] screen —> Touch the
key —> Touch [Belt
Convey Vol].
The [Belt Convey Vol] screen is displayed.
[Belt Convey Vol] is not reset until the power is turned off. However, it returns to [Normal] under the
following conditions.
- When folding mode is changed from custom folding to standard folding.
- When turning off the machine with [Oper Mode] set to [Normal].
8-7. Idling
When double-feed or mis-feed occurs, or when stopping paper folding operations by pressing the
key,
you can put the machine in the idling state by just stopping feeding operations. To resume paper feed, just
press the
key.
1
Touch the
key on the [Ready] screen —> Touch the
key —> Touch the
key —> Touch [Idling].
The [Idling] screen is displayed.
[1]
No.
Name
Function
Default
value
[1]
Idling
Sets on/off of idling.
Off
The machine will resume paper feed when the control panel is not operated more than 30 seconds in
the idling state.
Press the
key to stop the machine during idling.
