62
Chapter 3 Advanced Operation
When mis-detection occurs
Double-feed or miss-feed may sometimes be detected although the paper is fed normally.
• If false double-feed detection occurs when paper thickness is set to [Thin], repeat test folding after
setting paper thickness to [Thick].
If double-feed is detected mistakenly after selecting [Thick], double-feed detection function cannot be
used. Set the double-feed detection to off.
• If false miss-feeding detection occurs when paper thickness is set to [Thick], repeat test folding after
setting paper thickness to [Thin].
If mis-feed is detected mistakenly after selecting [Thin], double-feed detection function cannot be
used. Set the double-feed detection to off.
8-4. Detection
If [Paper Empty] is displayed even though paper is stacked in the paper feed tray, turn off paper detection.
This setting turns back on when the power is turned off.
If a detection error persists even after performing cleaning of the sensor, contact your dealer.
1
Touch the
key on the [Ready] screen —> Touch the
key —> Touch [Detection].
The [Detection] screen is displayed.
[1]
[2]
No.
Name
Function
Default
value
[1]
Load
Sets on/off of paper stack detection of the paper feed tray.
When the paper stack detection is turned off, the paper feed tray
descends after the machine stops.
Touch the
key or the
key to raise the paper feed tray.
On
[2]
Standard Size
Sets on/off of automatic standard size detection. When automatic
detection is turned off, you must select the paper size manually.
On
