16
Chapter 1 Before Operation
5-4. [Paper Length] input screen (non-standard paper)
[1]
[2]
[3]
[7]
[5]
[6]
[4]
No.
Name
Function
[1]
Paper length setting value
Displays the currently set paper length.
[2]
Preview screen
Displays the position of the input value.
[3]
(Return) ke
y
Saves the input value and transits to the next screen.
When you touch the key when the input value is outside the specification
range, the value that you can specify is displayed on the preview screen.
[4]
(Clear) key
Sets the input value to "0".
[5]
Numeric keypad
Inputs the value.
Setting range: 182.0 to 457.2 mm/7.17 to 18.00 inches
[6]
(Standard size switching)
key
Either the [Standard Size] screen, [Ready] screen or [Custom Fold ] screen
is displayed. The displayed screen differs depending on the settings on
the [Basic Settings] screen and on/off of the automatic detection of paper
size. When the key is grayed out, it cannot be operated because a standard
paper size is not detected.
[7]
(Cancel) key
Returns to the previous screen without saving the input content.
Press and hold to return to the [Ready] screen.
5-5. [Folding Mode] select screen
[1]
[2]
[5]
[3]
[8]
[4]
[7]
[6]
No.
Name
Function
[1]
Paper size display
Displays the currently set standard size.
When non-standard size paper is set, the paper length is displayed.
[2]
(Single fold) key
Sets the folding mode as single fold.