Page 8
SETTING UP PROCEDURE
1.
CUTTER INSTALLATION
Note: No tool is required for installation.
Stack Tray
Place the stacking divider and the stacking tray indicator
shown.
Power Cord
Use
caution
when plugging in power cord. Plug power
cord to the machine and plug the other end into the
wall outlet. Make sure the power selectable switch is
230V selected
2. SETTING UP PROCEDURE
1
To set the width of paper, loosen
thumbscrew knob on the side
guide and slide to position. Use
scales as reference point.
2
Fan paper before loading. This
will reduce static and toner
adhesion due to printing. For
best result, the paper stack should
be flat.
Thumbscrew
knob
Paper feed guide
Scales
