Formax Atlas C350, Operator'S Manual

Page: 61 / 95

61
2
Pre-set Patterns
To set up one of the pre-defined creasing patterns:
NOTE:
Choosing a new pre-set pattern
will reset any fine adjustments
that may have been entered on
other screens.
NOTE:
You can also choose Custom job to set up your own pattern. See “Custom Job” section
of this manual for details.
1. Click the Pattern button on the
Home screen
2. Select one of the pre-defined
crease/fold patterns. The left
column contains patterns for typi-
cal folded jobs. The right column
contains patterns for book cov-
ers, typical for crease only jobs.
Letter fold (tri-fold) Double parallel fold
Concertina fold (Z fold) Equally spaced creases
Half fold A Spine crease
Half fold V Hinge crease
Engineering fold Hinge crease with front flap
Gate fold Hinge crease with rear flap
Closed gate fold Hinge crease with two flaps
Counter: 2300
Batch: 23/50
Jobs
Home
Tools
Media
Counter
Fold Crease
AUTO
ABC 123*
Media
Job
Feeder
Clear
Clear
Pattern
Letter fold
SRA3
0.15mm, 200gsm
Counter: 2300
Batch: 23/50
Jobs
Home
Tools
Media
Counter
Fold Crease
AUTO
ABC 123*
Media
Job
Feeder
Clear
Clear
Pattern
Letter fold
SRA3
0.15mm, 200gsm
Continued on next page...
NOTE:
The position of the Crease Switch
and Fold Switch define patterns
that can be selected.