Formax Atlas C350, Operator'S Manual

Page: 13 / 95

13
User Interface
The Atlas C350 has a User Interface (UI) which allows for setting up jobs and viewing /
modifying machine settings and properties. Detailed descriptions of each menu and
sub-menu are found in Section 2 of this Operator Manual.
NOTE:
Depending on modules and features installed, the screen may look different from what
you see here. Some functions may be greyed out or not visible at all and remaining
buttons will stretch to fit the screen. This manual will most often show a fully configured
system.
The control panel is a touchscreen. Point at the screen and press the “button” to reach
the desired function or change the desired setting.
The Home screen displays paper and job parameters. The operator can start, edit, pause
or abort the job from this screen.
To get started:
1. Load paper on the in feed table and choose the correct paper size by clicking the
Media button from the top menu.
2. Choose the desired pre-set by clicking the Pattern button on the Home screen.
3. Press the Play button to start the machine cycle.