Forlinx SBC OK1052-C, User Manual

Page: 13 / 46

13
13
2.4 SoM Resource
Interface QTY Spec.
LCD 1 Up to RGB 888, WXGA up to 1366x 768
Camera 1 8-bit DVP, up to 5.0MP
SD/ MMC/ SDIO
≤
2
Up to UHS-1 SDR104 SD and 1-bit or 4-bit transferring mode of SDIO card
(104MB/s)
SD/ MMC/ SDIO1: 4-bit data bus
SD/ MMC/ SDIO2: 8-bit data bus (used as eMMC on SoM)
SD/ MMC/ SDIO3: 8-bit data bus
SD/ MMC/ SDIO4: 4-bit data bus
USB 2 USB2.0 (up to 480Mbps), integrated with HS USB Phy
SAI
≤
3 Up to 3x IIS audio
SPDIF 1 Sony and Philips digital audio interface
UART
≤
8 Each up to 5.0Mbps
eCSPI
≤
4
Full duplex enhanced synchronous serial interface, up to 52Mbit/ s, it could be
configured as host/ slave mode, four chip selections for multiple peripherals
IIC
≤
4
Ethernet
≤
1 10/ 100Mbps
PWM
≤
32 16-bit
JTAG supported
Keypad supported 8* 8
QSPI
≤
2
On SoM, the two QSPi are mounted with QSPI NAND Flash and QSPI NOR
Flash
CAN
≤
2 CAN2.0B
ADC
≤
10
Two 12-bit analogy and digital converter (ADC), integrated with input up to 10
channels
ISO7816-3
≤
2
Up to 3x PWMSS, and each has below features
eHRPWM: 16-bit timer, up to 2 separate PWM output
eCAP: 32-bit timer, 1 special for input capture
eQEP: rotating decode unit
EBI 1 16-bit parallel bus