Tongue and Groove
7' x 5' Pent Shed
Issue 0219
MTGPSH75RHS
RIGHT SIDE PANEL
MTGPSH75V2 PARTS LIST
MTGSH64DR
DOOR
MTGPSH75RF
ROOF QTY 1
Place the corner strips so that they are flush and cover
the joins between the panels. Fix each in place using
3x30mm screws.
Top View
2
1
1
MTGPSH75FR
FRONT PANEL
Place and secure two hinges to the door so that they line up with
the battens on the reverse, using 25mm
Security Screws
for each.
Place the door into the door end ensuring that the door is square.
Fix the doors in place using 3x25mm
Security
Screws
for the
smaller section of each hinge.
3
Fixing Pack (MTGPSH75V2FP)
Not to Scale
POZI DRIVE SCREWDRIVER
TAPE MEASURE
HAMMER
J
IMPORTANT, RETAIN FOR FUTURE REFERENCE;
READ CAREFULLY
Check all parts prior to assembly
This buildings is pressure treated to ensure longevity of all
timber components and to protect against rot. This may leave
a colour difference on some parts that will even out as the
moisture content stabilises. This will not require additional
treatment.
- Timber is a natural material. It will shrink and swell as a
result of varying moisture content.
- Please keep all plastic bags and small parts away from
children
- The roof of this building is not a load bearing structure.
- This product must be built on a solid level base.
Technical Help line:
0333 7777 089
8.30 am and 5.00
pm Monday to Friday.
In line with your statutory rights, please check all parts prior
to assembly, as assembly of damaged parts may be deemed
to be acceptance and this may affect the remedies you are
entitled to. If the product is not constructed in accordance
with the instructions, or is altered in anyway (e.g. painted),
the manufacturer cannot be held liable for any resulting
damage.
Important : Assembly of
this shed requires a
minimum of two adults.
HAMMER
Must Pre drill for
each screw used.
ROOF FELT
57121945PPT
CORNER STRIP 1945mm
QTY 2
MTGPSH75BK
BACK SIDE
MTGPSH75LHS
LEFT SIDE PANEL
70122086PPT
BARGE BOARD 2086mm
QTY 1
57121717PPT
CORNER STRIP 1717mm
QTY 2
FELT81RED
FELT QTY 1 ROLL
28282062PPT
DRIP STRIP 2062mm
MTGPSH75FL
FLOOR
A
SHARP KNIFE
FOR ROOFING FELT
B
E
B
4
A
B
C
D
Place the panels on top of the floor. Make sure that all the panels are tight and flush before fixing
them to each other using 3x50mm screws.
When the panels are secured to each other, make sure they are square before fixing to the floor
using 2x50mm screws for each side panel and 3x50mm screws for the front and back panels. Take
care position the screws so the locate into the floor bearers underneath.
I
70121650PPT
BARGE BOARD 1650mm
QTY 2
MTGWIN
WINDOW QTY2
XT623502
ACRYLIC SHEET
QTY 2
15120629PAII45PT
629mm BEADING
QTY 4
15120508PAII45PT
504mm BEADING
QTY 4
40mm Screw Qty 16
30mm Screw Qty 40
10mm Felt
T
acks
Qty 100
25mm Countersunk
Security Screws Qty 14
50mm Screw Qty 25
25mm Panel Pins Qty 28
25mm Screw Qty 23
REQUIRED TOOLS :
(NOT SUPPLIED)
SPIRIT LEVEL
SHARP KNIFE
FOR ROOFING FELT
Attention:
Take care when
placing the
screws. These
can not be
backed out.
H
Place the acrylic sheet inside the window frame and position the
beading so that each section fits flush and keeps the sheet tight. Fix
each piece using 3 x Panel Pins.
For the
opening window
fix two cranked hinges to the top of the
window so that it sits in the rebate. Fix the smaller section of the hinge
to the window using 2 x 25mm screws for each. Open up the hinges
and fix the remaining section of each hinge to the top of the window
panel using another 3 x 25mm screws for each hinge.
O
N
P
5
Opening Window
Secure block to back of
Door using 50mm screws.
Use Rim lock to line up
and drill 2 holes thought
block and door.
Fix rim lock to the block
using screws supplied.
Place door handle though
20mmm hole and secure
using 25mm screws.
Cover 2nd hole with
escutcheon and fix into
place.
Inside attach a striking
plate
DRILL 20mm HOLE
DRILL 20mm HOLE
DRILL 25x10mm HOLE
RIM-
LOCK
HANDLE
FRONT
3x
25mm
Screws
HANDLE
escut-
cheon
3x
50mm
Screws
Supplied
With
Rim-lock
INSIDE
2x
25mm
Screws
Striking
Plate
4x
40mm
Screws
Q
2x
25mm
Screws
Cranked Hinge
Qty 2
Rimlock with
Striking Plate
Qty 1
Door Handle
Set with Pin
Qty 1
‘T’ Hinge
Qty 2
Casement
Stay
Qty 2
B
C
D
E
F
G
H
I
J
K
L
M
N
N
N
O
N
P
80380140PPT
DOOR BLOCK
QTY 1
Q
