Using Auto-SYNC for Digital Input Connections
TIMS MVP
™
Setup and Configuration Guide 171
AccuStream Auto-SYNC Wizard Step 2: Adjust AOI Top/Bottom
Framing for Digital Connections
The next step is to adjust the top/bottom framing of the image.
To set an image height AOI, you need to adjust the
VBP
and
HEIGHT
.
Increasing the
VBP
(Vertical Back Porch) moves the image to
UP
.
Example
•
To set the top starting position of the image: Increase V
BP
To
78
•
To set the end position (HEIGHT) of the image: Decrease
HEIGHT
to
690
.
If Auto-SYNC does not increase VBP beyond a certain value, then you need to decrease HEIGHT
some more.
Figure 74: Auto-SYNC Wizard Step 2
Summary of Contents for TIMS 2000 EN
Page 1: ...060000 91 Rev 1...
